
AC Servo Motion
On RF models, full AC servo motors make acceleration nearly instant. Speed and acceleration for each option are listed in the specifications below.
Amplia. Potente. Productiva.
Ten highlights in under a minute, from the mirrors to the full MIRA lineup.
Clean or replace any mirror without tools or recalibration.
Lens cartridges are magnetic, and the focus lens is press fit with a silicone washer for easy access.
The laser head is sealed against dust and debris.
Integrated autofocus helps prevent collisions and gouged material.
Linear guide rails with ball bearings give smoother motion, which improves engraving quality.
A lightweight laser head means less overscan and less vibration.
A built-in high-resolution camera for precise positioning and monitoring.
Thermal sensors on the optics report temperature readings to the control panel.
LED lights under the lid light the work area while you load material and use the camera.
Pick the MIRA 5S, MIRA 7S or MIRA 9S by the working area you need.
REDLINE Series
The Redline platform behind your MIRA 7S: Grabadora y Cortadora Láser de: faster motion, easier upkeep and optics that stay protected.

On RF models, full AC servo motors make acceleration nearly instant. Speed and acceleration for each option are listed in the specifications below.

Linear guide rails with ball bearings give greater precision and smoother motion, which improves engraving quality and longevity.

A lightweight laser head means less over-scanning and less vibration.

A rigid frame stops the machine from flexing at speed. The Redline frame is robust enough that an entire side panel can be removed for access.

Enclosed linear rails and bearing blocks, with protective curtains on the side rails that keep debris inside the work area. Quieter inline fans are easier to clean.

Feed oversized sheets or long material through the machine to cut or engrave beyond the standard bed size.

Swap laser tubes in and out without realigning the beam path, so keeping a spare tube on the shelf is practical.

All mirrors are easy to reach and can be cleaned or replaced without tools or recalibration.

Lens cartridges are magnetic, and the focal lens is press fit with a silicone washer for easy access.

A built-in high-resolution camera for precise positioning and monitoring.

A redesigned laser head with integrated autofocus helps prevent collisions and gouged material.

A built-in gauge makes it easy to level the machine, which reduces friction and wear on the rails.

Added LED lights under the lid light the work area while you load material and use the camera.

The backlit AEON Laser logo doubles as a status light: white in standby, green in operation and red on an error.

Common functions sit on the surface of the keypad, and you can monitor water temperature, amperage, air pressure and optics temperature from the display.

Thermal sensors on the optics report temperature readings to the keypad, helping you catch problems before they cause a failure.

All optics sit outside the work area, which cuts down on cleaning.

The laser head is sealed against dust and debris, leaving only low-cost windows to maintain or replace.
Specifications
Showing: Tubo de vidrio de CO₂ de 60 W. These change with the option you select above.
Preguntas frecuentes
Corta y graba madera, acrílico, cuero, papel y cartón, caucho, tela y corcho, y graba vidrio y piedra. Nunca procese PVC ni otros plásticos a base de cloro, ya que desprenden gases peligrosos.
Ambas opciones son de 60 W. El tubo RF de metal pulsa más rápido y ofrece un detalle más fino, por lo que es ideal para el grabado de alta calidad; en la MIRA 7S se enfría por aire e incluye servomotores AC, aceleración de 8G y velocidades de hasta 4,200 mm/s. El tubo de vidrio es la opción de menor costo; se enfría por agua con un enfriador integrado y usa motores paso a paso, con aceleración de 5G y velocidades de hasta 1,500 mm/s. Seleccione una opción arriba para ver sus especificaciones completas.
Con el tubo RF alcanza hasta 4,200 mm/s con aceleración de 8G. Con el tubo de vidrio alcanza hasta 1,500 mm/s con aceleración de 5G. Ambas mantienen una precisión de posicionamiento de 0.01 mm o mejor.
El área de trabajo es de 27-1/2 × 19-11/16 pulg, con mesas de panal y de cuchillas y una bandeja recolectora de material. Una puerta de paso de 1.5 pulg de altura permite pasar material más largo a través de la máquina.
No. El enfriamiento, la asistencia de aire y la extracción están integrados. La opción con tubo de vidrio tiene un enfriador de agua S&A 3000 integrado, enfriado por ventilador, y el tubo RF se enfría por aire. Ambas tienen asistencia de aire integrada y un extractor en línea integrado de 110 W y 6 pulg. El suministro externo de aire comprimido es opcional.
Ambas opciones funcionan con 120 V, 60 Hz, con un consumo nominal de 500 W. La opción con tubo de vidrio necesita 15 A, y la opción RF necesita un circuito dedicado de 20 A.
LightBurn está incluido (un valor de $199) y funciona en Windows y Mac. La máquina tiene un teclado de 5 pulg con pantalla LCD, y la transferencia de datos por Wi-Fi está integrada.
El diseño Redline simplifica el mantenimiento. Los espejos se cambian sin herramientas, los cartuchos de lente son magnéticos y la estación modular de acople del tubo permite cambiar un tubo sin realinear la trayectoria del haz.
La MIRA 7S es un láser de Clase 1 con interbloqueos en la tapa y los paneles laterales, protección de flujo de agua, alarmas de temperatura del agua y de la óptica, monitoreo inteligente y un registro de diagnóstico.
Incluye una garantía de 2 años, y hay una garantía de 4 años disponible como opción.
Sí. La MIRA 7S graba una marca esmerilada en vidrio adecuado, como copas de vino, botellas, espejos y premios. Graba el vidrio, pero no lo corta. Use un accesorio rotativo compatible para piezas redondas y nunca grabe vidrio templado. Consulte nuestras máquinas láser para grabar vidrio, ajustes y consejos.
Sí. Con un accesorio rotativo compatible, la MIRA 7S graba vasos térmicos de acero inoxidable pintados o con recubrimiento en polvo. El láser de CO₂ retira el recubrimiento y deja a la vista el acero inoxidable. Consulte nuestras máquinas láser para grabar vasos térmicos, ajustes y consejos.
¿Necesita una configuración a medida?
Voltaje especial, combinaciones de tubos láser a medida, integración en una línea de producción existente: díganos qué necesita y le cotizamos la configuración exacta.