AEON MIRA 7S 60W CO₂ Laser Cutter & Engraver AEON Laser USA

MIRA 7S: Grabadora y Cortadora Láser de CO₂

$8,999.00
Precio de oferta  $8,999.00 Precio habitual  $10,999.00
Ir directamente a la información del producto
AEON MIRA 7S 60W CO₂ Laser Cutter & Engraver AEON Laser USA

Amplia. Potente. Productiva.

MIRA 7S: Grabadora y Cortadora Láser de CO₂

Configuración
MIRA-7S-60RF
$8,999.00
Precio de oferta  $8,999.00 Precio habitual  $10,999.00
1 in stock

El AEON MIRA 7S, equipado con un tubo RF de CO₂ de 60 W, combina un área de trabajo más amplia con un rendimiento de grabado RF de alta velocidad para entornos de producción exigentes. En comparación con el MIRA 5S, el 7S ofrece una mayor capacidad de material, un rendimiento más rápido y una precisión mejorada para aplicaciones detalladas de grabado y corte.

Laser & power
  • Tubo metálico RF de CO₂ de 60 W (vida útil de 18 000 horas)
  • Enchufe estándar estadounidense con conexión a tierra de 120 V (60 Hz)
  • Circuito exclusivo de 20 A
Motion & precision
  • Sistema de accionamiento servo X/Y
  • Velocidad de grabado de hasta 3.500 mm/s
  • Aceleración máxima 8G
  • Precisión de posicionamiento ±0,01 mm
  • Resolución 2.000 ppp (lente de 2")
Cooling, air assist & ventilation
  • RF refrigerado por aire interno
  • Bomba de aire de alto rendimiento integrada
  • Solenoide inteligente (asistencia de aire automática para presión externa alta)
  • Escape interno de alta presión (400 CFM)
Controls & software
  • Controlador Ruida
  • Compatible con LightBurn y RDWorks
  • Conectividad USB / Ethernet / Wi-Fi
Bed, dimensions & weight
  • Tamaño de la máquina An: 45-1/4″ x Pr: 37-5/8″ x Al: 20-1/4″
  • Peso de la máquina: 421 lb
  • Tamaño de la cama Pr: 19-11/16″ x An: 27-1/2″
  • Cama de panal + insertos para cuchilla
  • Puertas de paso delanteras y traseras
Safety
  • Láser Clase 1
  • El láser se detiene en el instante en que se abre la tapa
  • La alarma de agua detiene el funcionamiento si el refrigerante se sobrecalienta
  • La alarma de óptica protege los espejos y la lente del sobrecalentamiento
Chatear con Ventas

The REDLINE MIRA Up Close

Ten highlights in under a minute, from the mirrors to the full MIRA lineup.

  1. Tool-Free Mirrors

    Clean or replace any mirror without tools or recalibration.

  2. Magnetic Lens Cartridges

    Lens cartridges are magnetic, and the focus lens is press fit with a silicone washer for easy access.

  3. Safe-Guarded Laser Head

    The laser head is sealed against dust and debris.

  4. Integrated Autofocus

    Integrated autofocus helps prevent collisions and gouged material.

  5. Linear Guide Rails

    Linear guide rails with ball bearings give smoother motion, which improves engraving quality.

  6. Lightweight Laser Head

    A lightweight laser head means less overscan and less vibration.

  7. High-Resolution Camera

    A built-in high-resolution camera for precise positioning and monitoring.

  8. Proactive Smart Monitoring

    Thermal sensors on the optics report temperature readings to the control panel.

  9. Brighter Work Area

    LED lights under the lid light the work area while you load material and use the camera.

  10. Three Desktop Sizes

    Pick the MIRA 5S, MIRA 7S or MIRA 9S by the working area you need.

REDLINE Series

Built Into Every MIRA 7S: Grabadora y Cortadora Láser de

The Redline platform behind your MIRA 7S: Grabadora y Cortadora Láser de: faster motion, easier upkeep and optics that stay protected.

Speed and Precision

AC Servo Motion

AC Servo Motion

On RF models, full AC servo motors make acceleration nearly instant. Speed and acceleration for each option are listed in the specifications below.

Linear Guide Rails

Linear Guide Rails

Linear guide rails with ball bearings give greater precision and smoother motion, which improves engraving quality and longevity.

Lightweight Laser Head

Lightweight Laser Head

A lightweight laser head means less over-scanning and less vibration.

Built Solid, All in One

Robust Unibody Frame

Robust Unibody Frame

A rigid frame stops the machine from flexing at speed. The Redline frame is robust enough that an entire side panel can be removed for access.

All-in-One Design

All-in-One Design

Enclosed linear rails and bearing blocks, with protective curtains on the side rails that keep debris inside the work area. Quieter inline fans are easier to clean.

Material Pass-Through

Material Pass-Through

Feed oversized sheets or long material through the machine to cut or engrave beyond the standard bed size.

Easy to Maintain

Modular Tube Docking Station

Modular Tube Docking Station

Swap laser tubes in and out without realigning the beam path, so keeping a spare tube on the shelf is practical.

Tool-Free Mirrors

Tool-Free Mirrors

All mirrors are easy to reach and can be cleaned or replaced without tools or recalibration.

Magnetic Lens Cartridges

Magnetic Lens Cartridges

Lens cartridges are magnetic, and the focal lens is press fit with a silicone washer for easy access.

Set Up Right

High-Resolution Camera

High-Resolution Camera

A built-in high-resolution camera for precise positioning and monitoring.

Integrated Autofocus

Integrated Autofocus

A redesigned laser head with integrated autofocus helps prevent collisions and gouged material.

Bullseye Leveling Gauge

Bullseye Leveling Gauge

A built-in gauge makes it easy to level the machine, which reduces friction and wear on the rails.

Clear Feedback

Brighter Work Area

Brighter Work Area

Added LED lights under the lid light the work area while you load material and use the camera.

Status Light

Status Light

The backlit AEON Laser logo doubles as a status light: white in standby, green in operation and red on an error.

Intuitive LCD Display

Intuitive LCD Display

Common functions sit on the surface of the keypad, and you can monitor water temperature, amperage, air pressure and optics temperature from the display.

Protected Optics

Proactive Smart Monitoring

Proactive Smart Monitoring

Thermal sensors on the optics report temperature readings to the keypad, helping you catch problems before they cause a failure.

Safe-Guarded Optics

Safe-Guarded Optics

All optics sit outside the work area, which cuts down on cleaning.

Safe-Guarded Laser Head

Safe-Guarded Laser Head

The laser head is sealed against dust and debris, leaving only low-cost windows to maintain or replace.

Specifications

MIRA 7S: Grabadora y Cortadora Láser de Specs

Showing: Tubo RF de metal CO₂ de 60 W. These change with the option you select above.

Laser Source

Laser tube
60 W CO₂ metal RF tube (Davi)
Tube cooling
Air

Motion and Precision

Motors
AC servos
Guide rails
Hiwin linear rails
Max acceleration
8G
Max speed
4,200 mm/s
Minimum font size
1.0 × 1.0 mm
Positioning accuracy
≤ 0.01 mm
Scanning precision
Up to 2,000 DPI
Red dot positioning
Yes
Autofocus
Integrated
Wireless remote control
Optional

Cooling, Air Assist and Ventilation

Fume exhaust fan
Built-in 110 W, 6 in axial inline fan
Air assist
Integrated
Compressed air
Optional, external
Smart air solenoid valve
Yes

Work Table

Working area
27-1/2 × 19-11/16 in
Z-axis max bed travel
5-1/2 in
Downdraft ventilation
Yes
Blade table
Yes
Honeycomb table
Yes
Material collection tray
Yes
Material pass-through door
1.5 in height
Table lifting capacity
55 lb

Power Requirements

Voltage and frequency
120 V / 60 Hz
Amperage
20 A dedicated circuit
Rated power draw
500 W

Control and Software

Control panel
5 in keypad and LCD display
Memory capacity
1 GB
LightBurn software
Included ($199 value)
Wi-Fi data transfer
Integrated
Operating system
Windows and Mac
Supported file formats
AI, PDF, DXF, PLT, SVG, SC, BMP, JPEG, JPG, PNG, GIF, TIFF, TIF, TGA

Optics

Tool-free mirror change
Yes
Magnetic lens cartridge
Yes
Isolated optics
Yes
2 in lens
Standard
2.5 in lens
Optional
4 in lens
Optional
Mirror sizes
25 mm (×3)
Beam combiner
25 mm
Window
20 mm

Safety

Safety level
Class 1
Smart monitoring
Yes
Optics temperature alarm
Yes
Diagnostic log
Yes
LED status light
Yes
Lid interlock
Yes
Side panel interlocks
Yes
Water flow protection
Yes
Water temperature alarm
Yes

Size and Weight

Machine dimensions
W 45-1/4 × D 37-5/8 × H 20-1/4 in
Machine weight
396 lb
Shipping dimensions
W 49 × D 43 × H 29 in
Weight with crate
474 lb

Add-Ons and Warranty

Rotary
Optional
Fume extractor
Optional
Warranty
2 years included
Extended warranty
4 years optional

Preguntas frecuentes

Preguntas sobre la MIRA 7S, respondidas

¿Qué puede cortar y grabar la MIRA 7S?

Corta y graba madera, acrílico, cuero, papel y cartón, caucho, tela y corcho, y graba vidrio y piedra. Nunca procese PVC ni otros plásticos a base de cloro, ya que desprenden gases peligrosos.

Tubo de vidrio o tubo RF: ¿cuál debo elegir?

Ambas opciones son de 60 W. El tubo RF de metal pulsa más rápido y ofrece un detalle más fino, por lo que es ideal para el grabado de alta calidad; en la MIRA 7S se enfría por aire e incluye servomotores AC, aceleración de 8G y velocidades de hasta 4,200 mm/s. El tubo de vidrio es la opción de menor costo; se enfría por agua con un enfriador integrado y usa motores paso a paso, con aceleración de 5G y velocidades de hasta 1,500 mm/s. Seleccione una opción arriba para ver sus especificaciones completas.

¿Qué tan rápida es la MIRA 7S?

Con el tubo RF alcanza hasta 4,200 mm/s con aceleración de 8G. Con el tubo de vidrio alcanza hasta 1,500 mm/s con aceleración de 5G. Ambas mantienen una precisión de posicionamiento de 0.01 mm o mejor.

¿Qué tamaño tiene el área de trabajo?

El área de trabajo es de 27-1/2 × 19-11/16 pulg, con mesas de panal y de cuchillas y una bandeja recolectora de material. Una puerta de paso de 1.5 pulg de altura permite pasar material más largo a través de la máquina.

¿Necesita un enfriador, extractor o bomba de aire externos?

No. El enfriamiento, la asistencia de aire y la extracción están integrados. La opción con tubo de vidrio tiene un enfriador de agua S&A 3000 integrado, enfriado por ventilador, y el tubo RF se enfría por aire. Ambas tienen asistencia de aire integrada y un extractor en línea integrado de 110 W y 6 pulg. El suministro externo de aire comprimido es opcional.

¿Qué alimentación eléctrica necesita?

Ambas opciones funcionan con 120 V, 60 Hz, con un consumo nominal de 500 W. La opción con tubo de vidrio necesita 15 A, y la opción RF necesita un circuito dedicado de 20 A.

¿Con qué software funciona?

LightBurn está incluido (un valor de $199) y funciona en Windows y Mac. La máquina tiene un teclado de 5 pulg con pantalla LCD, y la transferencia de datos por Wi-Fi está integrada.

¿Cuánto mantenimiento necesita?

El diseño Redline simplifica el mantenimiento. Los espejos se cambian sin herramientas, los cartuchos de lente son magnéticos y la estación modular de acople del tubo permite cambiar un tubo sin realinear la trayectoria del haz.

¿Qué funciones de seguridad incluye?

La MIRA 7S es un láser de Clase 1 con interbloqueos en la tapa y los paneles laterales, protección de flujo de agua, alarmas de temperatura del agua y de la óptica, monitoreo inteligente y un registro de diagnóstico.

¿Qué garantía incluye?

Incluye una garantía de 2 años, y hay una garantía de 4 años disponible como opción.

¿La MIRA 7S puede grabar vidrio?

Sí. La MIRA 7S graba una marca esmerilada en vidrio adecuado, como copas de vino, botellas, espejos y premios. Graba el vidrio, pero no lo corta. Use un accesorio rotativo compatible para piezas redondas y nunca grabe vidrio templado. Consulte nuestras máquinas láser para grabar vidrio, ajustes y consejos.

¿La MIRA 7S puede grabar vasos térmicos?

Sí. Con un accesorio rotativo compatible, la MIRA 7S graba vasos térmicos de acero inoxidable pintados o con recubrimiento en polvo. El láser de CO₂ retira el recubrimiento y deja a la vista el acero inoxidable. Consulte nuestras máquinas láser para grabar vasos térmicos, ajustes y consejos.

¿Necesita una configuración a medida?

Hable con nuestro equipo de ingeniería

Voltaje especial, combinaciones de tubos láser a medida, integración en una línea de producción existente: díganos qué necesita y le cotizamos la configuración exacta.

Chatear con Ventas