AEON Laser at PRINTING United Expo 2026
See Print to Cut Run Live at Booth C3475
AEON Laser brings the new MIRA X to PRINTING United, September 23 to 25 at the Las Vegas Convention Center. Bring your printed sheets and watch a 150W RF laser find the registration marks and cut them clean in one pass.
Find us at
Booth C3475
The MIRA X Is Built for Printed Work
Most lasers on the show floor were designed for blanks. The MIRA X was designed for what comes off your press, which means registration, repeatability, and a cycle time you can quote against.
Cuts what you print
VisionFlow reads the registration marks on each printed sheet and adjusts the cut path before it runs. Short run decals, labels, and packaging prototypes come off the bed square, sheet after sheet.
150W RF on a desktop footprint
Engraving at 3000 mm/s with 8G acceleration, driven by the most powerful desktop CO2 tube available. It holds a razor sharp 2.5pt font and still cuts production volume.
Ready for a production floor
Four side pass-through for oversized stock, a three camera system, tool-less maintenance optics, a Class 1 fully enclosed frame, and a two year US-based warranty behind it.
Show-only pricing
From $4,756
Reserve during PRINTING United
Show-Only Pricing on the MIRA X
Reserve a MIRA X while the show is open and you hold show pricing on the launch configuration. The window closes when the hall does, Friday September 25 at 3:00 PM.
- Reserve at Booth C3475, or request a call and reserve by phone.
- Configuration, lead time, and freight confirmed before you commit.
- Free US-based support and LightBurn compatibility on every machine.
What a Booth Demo Actually Looks Like
Twenty minutes, your material, your numbers.
Bring your work
Printed sheets, substrates, or the job you cannot run cleanly on the equipment you have today.
Watch it run
We cut and engrave your material on the MIRA X while you watch, including a registered print to cut pass.
Leave with numbers
Cycle time, cost per piece, and what the machine adds to your capacity, so the decision is a business case rather than a spec sheet.
Book Time With Steven at Booth C3475
Floor time runs in twenty minute slots and Wednesday fills first. Send your details and you will land on Steven's calendar to pick your time.
Steven Hendrickson
Steven runs the demos at the booth and handles configuration, pricing, and lead time for every MIRA X that leaves the show. If you cannot make it to Las Vegas, he will run the same demo over video.
Submitting takes you straight to Steven's calendar to choose your slot. We use your details to schedule the demo and follow up about the MIRA X.
Not Making It to Las Vegas?
Show pricing is open to anyone who reserves during the show, whether you are on the floor or not. Request a call and Steven will run the same demo over video and hold the same number.
Request a CallPRINTING United Expo 2026, September 23 to 25, Las Vegas Convention Center, North and Central Halls, Booth C3475. Show hours are 9:00 AM to 5:00 PM Wednesday and Thursday and 9:00 AM to 3:00 PM Friday. Show pricing applies to MIRA X reservations placed between September 23 and September 25, 2026, and the price shown is the starting configuration. Show and registration details are managed by PRINTING United Alliance.