RF
RF metal tube, not glass
Finer beam, longer life, and you refill it instead of replacing it.
MIRA 6X RF CO₂ Laser Engraver & Cutter
$6,999.00
Sale price
$6,999.00
Regular price
Skip to product information
MIRA X Series · 40 W RF
MIRA 6X RF CO₂ Laser Engraver & Cutter
A 40 W RF metal laser with print to cut and AI Powered VisionFlow Automation, sized for your bench.
$6,999.00
Sale price
$6,999.00
Regular price
Shipping calculated at checkout.
- 40 W RF metal laser tube, refillable, rated for about 20,000 hours
- 23.6 × 11.8 in work area with four-side pass-through
- Print to cut with two-camera VisionFlow registration
- Air cooled with a built-in exhaust fan. No chiller to set up
Freight shipping: $680. Delivered to your door.
Not sure it's the right fit?
Book a free Laser Fit Call →
2-Year
US-Based Warranty
Class 1
Fully Enclosed
US Sales
& Support
$820K+
Backed on Kickstarter
At a glance
Six reasons to start with the MIRA 6X
3,000
3,000 mm/s with 8G
Fast engraving that still holds 2.5 pt text.
P2C
Print to cut built in
VisionFlow finds your registration marks and cuts on the line.
4
Four-side pass-through
Long stock feeds straight through the machine.
Air
Air cooled
No chiller, no water, no extra plumbing on your bench.
125 lb
Fits your bench
33.5 × 20.9 × 13.8 in and 125.7 lb.
AI Powered VisionFlow Automation
Print it. Load it. Cut it.
Print your graphics on any printer, load the sheet, and the MIRA 6X finds the registration marks for you. Two lid cameras map the bed, then the CCD camera on the laser head locks onto each mark so every cut lands on the line.
01
Print
Add registration marks to your file and print.
02
Load
Place the printed sheet anywhere on the bed.
03
Detect
VisionFlow finds every mark automatically.
04
Cut
The laser contour cuts exactly on the line.
40 W RF
RF quality at an entry price
The same kind of RF metal tube used in industrial machines, with a fine beam for crisp engraving and clean cuts in wood, acrylic and leather.
Hyper-speed. Micro-precision.
3,000 mm/s with 8G acceleration
Engraves fast without losing detail, down to 2.5 pt text.
Desktop workspace
Big enough for real orders
A 23.6 × 11.8 in bed fits trays of coasters, tags and ornaments, and pass-through doors take longer pieces.
Batch Production
One click. Every piece.
AI Powered VisionFlow Automation recognizes repeated parts on the bed and places your design on every one in a single click. No jigs, no hand alignment, no wasted blanks.
- Batch fill matches and positions repeated designs automatically
- Run 50, 100 or 500 pieces with the same setup
- PLC-ready port for automated production lines when you grow into it
Built to Grow with Your Shop
Long stock. Many tumblers. One machine.
Four-side pass-through
Open front, back and sides, so long boards and signs feed straight through the machine.
QuadTurn rotary
The optional QuadTurn rotary, made for the MIRA 6X and MIRA 9X, engraves tumblers and other round items. (Photo coming. Leave the space.)
Built for your shop
Simple to set up. Built to keep running.
The features that make a first pro laser easy to live with.
Air
Air cooled, no chiller
Air cooled
No chiller to fill or maintain. Plug it in, vent it, and start working.
Tool-free optics
Magnetic lens mount and tool-free mirrors. Clean or swap optics without re-aligning the beam.
Auto
Touchless ultrasonic autofocus
Touchless autofocus
Ultrasonic autofocus sets the height for each job without touching the material.
20 W
Built-in exhaust fan
Built-in exhaust
A built-in exhaust fan pulls smoke out of the machine. Vent it outside or into a fume extractor.
Touchscreen control
Run and monitor jobs from the full-touch control panel.
Works with your software
EZMaker and RDWorks included, LightBurn compatible. Import from CorelDRAW, Illustrator and AutoCAD.
Applications
What will you make?
Signs, drinkware, leather goods, gifts and production parts, on the materials your customers ask for.
Wood
Acrylic
Leather
Paper & cardboard
Rubber
Fabric
Foam
Glass*
Stone*
Ceramic*
*Surface engraving
The Laser Source
Why an RF Metal Tube
Glass tubes cost less up front. RF tubes pulse faster, hold a finer beam for detail work and last about twice as long. When the gas runs out, you refill the tube instead of replacing it.
| MIRA X Series RF metal tube | Typical DC glass tube | |
|---|---|---|
| Rated life | About 20,000 hours | About half as long |
| End of life | Refill and keep running | Replace the tube |
| Beam | Thinner beam, finer detail | Wider beam |
Proven in the Field
Makers are already running the MIRA X Series
$820K+
Backed on Kickstarter
150 W Aeon Mira X Is Here And It Has AUTOMATION!
Print to Cut, Robot Arm, Multi-Cup Rotary... WHAT?!
Is the AEON MIRA X the Real Deal?
Built for Real Production
Made by AEON, supported in the US
The MIRA X Series is built on AEON's own production line, with US-based sales, support and parts behind it.
The MIRA X Series
Find the right MIRA
Three machines, one platform. Every model is RF, every model does print to cut.
MIRA 6X
Entry desktop. The upgrade from hobby lasers for startups, side businesses and classrooms.
$6,999
As low as $144/mo
Laser
40 W RF
Work area
23.6 × 11.8 in
Cameras
1 lid + 1 CCD
Cooling
Air cooled
Print to cut
Yes
Shipping
$680
MIRA 9X
The volume workhorse. Enough bed and power for production acrylic, wood and drinkware.
$9,999
As low as $205/mo
Laser
75 W RF
Work area
35.4 × 17.7 in
Cameras
2 lid + 1 CCD
Cooling
Water + air
Print to cut
Yes
Shipping
$980
MIRA X
Near large-format capacity in a compact footprint, for shops that need sheet size and speed.
$17,999
As low as $370/mo
Laser
150 W RF
Work area
39.4 × 23.6 in
Cameras
2 lid + 1 CCD
Cooling
Compressor chiller
Print to cut
Yes
Shipping
$1,520
MIRA 6X
Entry desktop. The upgrade from hobby lasers for startups, side businesses and classrooms.
Laser
40 W RF
Work area
23.6 × 11.8 in
Cameras
1 lid + 1 CCD
Cooling
Air cooled
Print to cut
Yes
Shipping
$680
$6,999
As low as $144/mo
Buy It NowMIRA 9X
The volume workhorse. Enough bed and power for production acrylic, wood and drinkware.
Laser
75 W RF
Work area
35.4 × 17.7 in
Cameras
2 lid + 1 CCD
Cooling
Water + air
Print to cut
Yes
Shipping
$980
$9,999
As low as $205/mo
View MIRA 9XMIRA X
Near large-format capacity in a compact footprint, for shops that need sheet size and speed.
Laser
150 W RF
Work area
39.4 × 23.6 in
Cameras
2 lid + 1 CCD
Cooling
Compressor chiller
Print to cut
Yes
Shipping
$1,520
$17,999
As low as $370/mo
View MIRA XNeed more power or a bigger bed? The MIRA 9X and MIRA X run the same software and VisionFlow tools.
Compare the MIRA X Series →
Built in
Everything you need to start cutting
- 40 W RF metal laser tube
- 13 MP lid camera
- 5 MP CCD camera
- Touchless ultrasonic autofocus
- Built-in 20 W exhaust fan
- Touchscreen control panel
- EZMaker software
- RDWorks software
2-year warranty
US based, covering the machine, electronics and laser tube.
US support
Sales, support and parts from our US team.
Delivery
$680 shipping to your door.
Specifications
MIRA 6X full specs
Processing capacity
Laser type
40 W RF metal laser tube
Processing mode
Laser cutting, laser engraving
Work area (X × Y)
23.62 × 11.81 in (600 × 300 mm)
Z-axis travel
4.33 in (110 mm)
Max engraving speed
3,000 mm/s
Max acceleration
8G
Minimum text size
2.5 pt
Pass-through
Four sides
Transmission
X and Y synchronous belt drive
Exhaust fan
20 W, built in
Cooling
Air cooled
Frame
Lightweight aluminum alloy
Software
Control panel
Touchscreen
Software
EZMaker, RDWorks. LightBurn compatible
(licensed separately)
Operating system
Windows and macOS
Operation and cameras
Autofocus
Touchless ultrasonic
Lid preview camera
1 × 13 MP
CCD camera
1 × 5 MP
Safety and general
Laser class
Class 1
Input voltage
110V / 220V
Total machine power
960 W
Dimensions (L × W × H)
33.46 × 20.87 × 13.78 in
(850 × 530 × 350 mm)
Net weight
125.66 lb (57 kg)
Rotary attachment
Optional QuadTurn rotary
Talk to an expert
Not sure the MIRA 6X is the right fit?
Book a free 20-minute Laser Fit Call. Tell us what you make and how much of it, and we'll tell you honestly which machine fits, including when you should start bigger.
Steven H.
Your AEON Laser Pro
Common questions
MIRA 6X questions, answered
What can the MIRA 6X cut and engrave?
Wood, acrylic, leather, paper and cardboard, rubber and fabric, plus surface engraving on glass and stone. Like any CO₂ laser it does not cut metal.
Why choose the MIRA 6X over a hobby laser?
Most hobby lasers use diode modules or glass CO₂ tubes. The MIRA 6X uses a 40 W RF metal tube, which pulses faster and holds a finer beam, so fine text and small details stay sharp. It is rated for about 20,000 hours and can be refilled instead of replaced. It also adds print to cut and VisionFlow batch tools.
How does print to cut work?
Add registration marks to your design and print it. Load the sheet on the bed. The lid camera locates the marks, the CCD camera on the laser head pinpoints each one, and the laser cuts on the line.
Does the MIRA 6X work with LightBurn?
Yes. The MIRA 6X is LightBurn compatible (LightBurn is licensed separately). It also runs EZMaker for VisionFlow print to cut and batch fill, and RDWorks.
Is it safe to use indoors?
The MIRA 6X is a Class 1 fully enclosed laser. The built-in exhaust fan should vent outside or into a suitable fume extractor. Proper ventilation and safe material handling are still required.
What warranty comes with the MIRA 6X?
Two years, US based, covering the machine, the electronics and major components including the laser tube.
How is it delivered, and how much space does it need?
Shipping is $680. The MIRA 6X weighs 125.7 lb and measures 33.5 × 20.9 × 13.8 in, so it fits on a sturdy workbench or table. It runs on 110V or 220V and draws up to 960 W.
Can it engrave tumblers?
Yes. Add the optional QuadTurn rotary, made for the MIRA 6X and MIRA 9X.
MIRA 6X
Pro RF laser power, sized for your bench.
$6,999
As low as $144/mo