PULSAR MOPA Fiber Laser Engraver & Marker
3D Fiber Galvo Laser · 100 W or 200 W MOPA
PULSAR MOPA Fiber Laser Engraver & Marker
A fully enclosed 3D fiber galvo laser for marking, deep engraving and color work on metal.
- 100 W or 200 W JPT MOPA M7 fiber source
- 11.8 × 11.8 in marking area with three-axis dynamic focusing
- Color marks on stainless steel, black marks on anodized aluminum
- Air cooled and runs on LightBurn
- 2-YearUS-Based Warranty
- Class 1Fully Enclosed
- US Sales& Support
- Air CooledNo Chiller Needed
Finance Your PULSAR Through Geneva Capital
Apply in a few minutes and choose a term from 12 to 60 months.
PULSAR MOPA
Engrave metal in 3D.
Mark it in color.
The PULSAR MOPA is a fully enclosed 3D fiber galvo laser for marking, deep engraving and color work on metal. Choose a 100 W or 200 W JPT MOPA M7 source, load parts up to 11.8 × 11.8 in, and let three-axis dynamic focusing follow relief and curved surfaces for you.
Relief And Curved Surfaces In One Setup
Three-axis dynamic focusing moves the focal point as the job runs, so the PULSAR MOPA engraves relief effects and follows curved surfaces without stopping to refocus. A motorized Z axis gives you controlled, multi-layer depth on deep engraving work.
Color On Stainless, Black On Aluminum
A MOPA source lets you set pulse width and frequency independently, from 2 to 500 ns and 1 to 4,000 kHz. That control is what produces repeatable color marks on stainless steel, deep black marks on anodized aluminum and cleaner results on heat-sensitive parts.
Enclosed And Built For The Shop Floor
The Class 1 cabinet keeps the beam contained behind a laser-safe viewing window. An electric sensor door with anti-pinch protection opens the work area, an interior light shows the part, and a status light tower tells you from across the room when a job is running.
Fast Setup, Accurate Placement
Preview the mark on the part before you fire, set focus with the red light pointer, and fixture repeat jobs on the perforated worktable. The PULSAR MOPA runs on LightBurn and is air cooled, so there is no chiller to plumb or maintain.
Technical Specifications
| Laser source | JPT MOPA M7 fiber, 100 W or 200 W |
|---|---|
| Wavelength | 1,064 nm |
| Pulse width | 2 to 500 ns |
| Frequency | 1 to 4,000 kHz |
| Single pulse energy | 1.5 mJ |
| Beam quality | M² under 1.6 |
| Focusing | X, Y and Z three-axis dynamic focusing |
| Marking area | 11.8 × 11.8 in (300 × 300 mm) |
| Z axis | Motorized |
| Enclosure | Class 1, electric sensor door with anti-pinch protection |
| Cooling | Air cooled |
| Software | LightBurn |
| Power | 110 V or 220 V, 50/60 Hz, up to 1,500 W |
| Operating temperature | 32 to 104 °F (0 to 40 °C), non-condensing |
| Packed size and weight | About 36.6 × 27.2 × 45.7 in, 298 lb |
What It Works On
Marks and engraves stainless steel, aluminum, brass, copper, titanium, gold and silver, plus many hard plastics, and cuts thin sheet metal. Use it for logos, serial numbers, barcodes and QR codes, deep engraving, relief work and jewelry.
Questions Buyers Ask
Should I choose 100 W or 200 W?
Both use the same cabinet, 3D head and JPT MOPA M7 source family. The 200 W option removes material faster, which matters most for deep engraving, relief work and cutting thin sheet metal. For marking and color work, 100 W covers most shops.
Does it need a chiller or special power?
No chiller. The PULSAR MOPA is air cooled and runs on 110 V or 220 V at 50/60 Hz, drawing up to 1,500 W.
Can I run it in an open shop?
Yes. It is a Class 1 fully enclosed machine with an electric sensor door and a laser-safe viewing window.
What software does it use?
The PULSAR MOPA runs on LightBurn.
Backed by a 2-year US-based warranty and US sales and support.
Questions Before You Buy?
Talk To Our US Sales Team
Tell us what you mark and how many parts you run, and we will help you choose the right PULSAR for your shop.