Tech with Lek

Tech with Lek

Lek, AEON’s Chief Technology Officer, breaks down laser technology one topic at a time. Each episode answers a single question in a few minutes, and each one comes with a written guide you can come back to.

Latest episode

Laser Acceleration Explained: G Ratings and Overscan

Two lasers can advertise the same top speed and still finish the same engraving at very different times. Lek explains what a G rating measures and where it shows up in real jobs.

Previous Episodes

  • How RF CO2 Lasers Stay Cool: Fans vs Water

    Air cooling, water cooling, and why an RF tube should stay close to room temperature.

  • CO2 Laser Frequency Settings: How to Test for Better Cuts

    What the frequency setting controls and a simple three-shape test to find what works on your material.

  • Glass vs RF CO2 Lasers: Cutting Performance Explained

    Why a glass tube often cuts thicker materials faster than an RF source, and where each one fits.

  • RF CO2 Laser vs Glass Tube: Key Differences Explained

    How each source makes its beam, what each is best at, and how to choose between them.

  • CO2 Laser Lens Design Explained: Plano Convex vs. Meniscus

    The two main lens shapes, which way a plano-convex lens goes in, and which design performs best.

  • The CO2 Laser Lens Guide: Focal Length Breakdown

    What focal length means and which lens to use: 1.5, 2, 2.5 or 4 inch.

New episodes are posted twice a month. Have a laser question for Lek? Leave it in the comments on any episode.