Knowledge Base
Accessories
Guides, videos and manuals for your AEON laser.
LightBurn Camera Setup
Calibrate the LightBurn camera on a MIRA or NOVA, use it to place and trace designs, and fix common placement issues.
Read Guide →LightBurn Bridge Setup: MIRA
Connect a LightBurn Bridge to your MIRA, join it to your Wi-Fi network and add it as a device in LightBurn.
Read Guide →Steps Per Rotation: Roller Rotary
Fix rotary engravings that come out stretched or squished by measuring a test square and recalculating steps per rotation.
Read Guide →Smart Rotary: MIRA Pro
Set up the Smart Rotary on a MIRA Pro: choose the wheel setup, load the rotary settings, align and focus, run the job and retur...
Read Guide →External Air Compressor
Why an external air compressor helps with cutting, how the smart solenoid switches air sources, and how to set up a California ...
Read Guide →Install a 4” Lens: NOVA
Fit the 4” lens to a NOVA for thicker materials and deeper items, then calibrate the auto focus with a focal ramp test.
Read Guide →Install a 2.5” Lens: MIRA
Swap the standard 2” lens in a MIRA for a 2.5” lens and focus it manually, for more clearance on tall objects.
Read Guide →Install a 1.5” Lens: MIRA
Swap the standard 2” lens in a MIRA for a 1.5” lens, for finer engraving detail.
Read Guide →Wireless Remote Control for AEON Lasers
What each button on the wireless remote does, and how to wire a remote into a legacy or REDLINE machine.
Read Guide →Roller and Chuck Rotary Guide: REDLINE MIRA S
Install and use a roller or chuck rotary on a REDLINE MIRA S: set up the rotary, configure LightBurn, prepare the file and run ...
Read Guide →Smart Rotary: NOVA
How to set up, align and run the Smart Rotary on a NOVA, and how to return the machine to flat settings afterwards.
Read Guide →Optics Kit Guide: Available Lenses and Installation (REDLINE NOVA S)
The lens options for a REDLINE NOVA S, what is in the optics kit, and how to install and focus each lens.
Read Guide →Optics Kit Guide: Available Lenses and Installation (REDLINE MIRA S)
The lens options for a REDLINE MIRA S, what is in the optics kit, and how to install and focus each lens.
Read Guide →4 Inch Lens Kit MIRA
Swap the standard lens on a MIRA for the 4 inch lens kit, then set focus manually with the focus gauge.
Read Guide →Still Stuck? Call (321) 260-2325
Our US-based support team is one phone call away. More ways to reach us are on the Support page.