Applies to: REDLINE MIRA S and NOVA S
This list shows the standard contents that ship with your REDLINE MIRA S or NOVA S. Use it when you unpack the machine, and any time you need to identify an item from the machine toolbox.
With the machine
Honeycomb table ×1
A stable surface for engraving and cutting. It also leaves space for ventilation while the machine runs.
Exhaust hose ×1
Hose used for fume extraction.
Hose clamps ×2
Clamps that secure the exhaust hose to the exhaust fan flange.
In the pre-packed contents box
Funnel ×1
For filling the chiller.
Allen key set ×1
For general use on the machine.
Power cord ×1
Connects the machine to its power source.
Ethernet cord ×1
Transfers data from a computer to the machine.
USB cord ×1
Transfers data from a computer to the machine.
Spare drive belts ×2
Spare belts for the X and Y motors.
Cabinet keys ×2
Lock and unlock the machine’s side panels.
Linear rail grease and spare plugs ×1
Grease for the linear rail and spare plugs for the gantry fill port.
Optics cleaning swabs ×1
Swabs for cleaning optics.
Optics removal tool ×1
Suction cup tool for removing optics.
Optics air duster ×1
For blowing debris off optics.
Machine alignment targets ×2
Targets for aligning the machine.
Lens wipes ×2
Cleaning wipes for optics.
Focal gauges ×2
Gauges for manual focus.
6 mm × 1 ft air hose ×1
Spare air hose.
F2F air fitting ×1
Female-to-female fitting for repairs, or for extending and joining air hose.
Spare laser head air fitting ×1
Spare air fitting for the laser head.
Metal planar lens removal tool ×1
Optics removal tool supplied by the factory.
Cleaning brush ×1
For cleaning hard-to-reach spots in the machine.
Safety glasses ×1
Rated for the CO2 laser wavelength (10.6 µm).
Pie wheel ×1
Proof of the factory machine test. It shows how the machine engraves on clear acrylic at a set speed across the full power range.
Need a hand?
Email support@aeonlaser.us or call 321-260-2325. More ways to reach us are on the Support page.