Applies to: REDLINE MIRA 5S, MIRA 7S and MIRA 9S, and REDLINE NOVA 10S, NOVA 14S and NOVA 16S
This guide shows how to change the language on the screen of your laser’s control panel, for example back to English, using the keypad on the machine. It takes about a minute.
The screen on the control panel can show its menus in 13 languages. If yours is showing a language you cannot read, you can switch it back to English from the keypad. The same steps set any of the other languages. The photos in this guide show an English screen, so you can see what each item is called.
This guide is for REDLINE machines. If you have a legacy MIRA or NOVA, the keypad is different: follow How to Change the Screen Language Back to English: MIRA and NOVA (Legacy) instead.
If you cannot read the screen: You can still follow this guide. It tells you where each item sits on the screen, not only what it says, and the photos show the items to choose outlined in red.
What you need
- No tools: everything is done on the keypad of your laser
- The laser switched on and idle, with no job running or paused
- About one minute
Read this guide all the way through before you start. The steps follow the way our own technicians change the language.
Get to know the control panel
Everything in this guide is done on the control panel: the screen, and the keypad to the right of it. You only need the five keys highlighted in the diagram. The photos show a REDLINE MIRA. The REDLINE NOVA has the same control panel.


| Key | What it does in this guide |
|---|---|
| Menu | Opens the menu. It is the round key in the middle of the arrow keys. |
| Y↓ (down arrow) | Moves the highlight down one item. |
| Y↑ (up arrow) | Moves the highlight up one item. |
| Enter | Opens the highlighted item, or confirms your choice. |
| Esc | Goes back one screen. |
1. Open the list of languages
-
With the laser switched on and idle, press Menu. A menu opens with two columns of items, and the first item in the left column is highlighted.
Caution: Leave the other items in this menu alone unless a technician asks you to use them. Several of them change how your machine is set up.

The menu as it opens. The language item, outlined in red, is the third item in the left column. -
Press Y↓ (down arrow) twice. The highlight moves down the left column to its third item, which is the language item. On an English screen it reads Language>. On some REDLINE machines it reads Language Setting, in the same place.

The language item is highlighted. Press Enter to open it. Press Enter. The list of languages opens.
2. Choose English
-
Find English in the list. Each language is written in its own script, so this item always reads English, whatever language the screen is showing now. On the machine shown here it is the third item from the top, on the left. The list may be in a different order on your machine.

The list of languages. English, outlined in red, is highlighted. Press Y↓ (down arrow) or Y↑ (up arrow) until English is highlighted.
Press Enter. The words on the screen change to English.
Press Esc until the main screen returns.
Note: Stop when the main screen is showing. If you press Esc again while the laser is idle, the laser head moves back to its origin point.
The screen on your laser is now in English. To use one of the other languages instead, follow the same steps and choose it from the list. If the screen does not change, or you cannot find the items shown in this guide, open a support ticket and tell us what you see. A photo of the screen helps our technicians help you faster.
Need a hand?
Email support@aeonlaser.us or call 321-260-2325. More ways to reach us are on the Support page.