CO2 Laser Lens Design Explained: Plano Convex vs. Meniscus

The Shape of the Lens Matters

Most lens conversations are about focal length. Fewer people hear about the actual shape of the lens. In this episode of Tech with Lek, AEON’s Chief Technology Officer explains the two main CO₂ laser lens designs. Once you understand them, choosing the right lens becomes much easier.

The short answer: A plano-convex lens is the common, affordable choice that works well for both engraving and cutting. A positive meniscus lens reduces spherical aberration for a cleaner focus. If you want the best performance from your CO₂ laser, Lek recommends a meniscus lens.

01

Two Main Types of CO₂ Laser Lens

There are two main types of CO₂ laser lenses: plano-convex and positive meniscus. They differ in the shape of their two surfaces.

Plano-convex incoming beam curved side flat side workpiece Positive meniscus both sides curved, one steeper
Side views of the two lens shapes. Simplified, with curvature exaggerated.
02

Plano-Convex Lens

A plano-convex lens has one flat side and one curved side. It’s one of the most common lenses in CO₂ lasers because it offers excellent performance and affordability, and it works well for both engraving and cutting.

Installation direction matters. When installed correctly, the curved side faces the incoming beam and the flat side faces the workpiece. That minimizes optical distortion and delivers a clean, consistent focal spot.

03

Positive Meniscus Lens

On a positive meniscus lens, both sides are curved, but one curve is steeper than the other.

This design helps reduce spherical aberration, meaning more of the laser energy converges into the same focal point. The result can be a cleaner beam, slightly improved edge quality, and a little more usable energy at the focus. Many premium CO₂ laser lenses use this design.

04

Plano-Convex vs. Meniscus at a Glance

  Plano-convex Positive meniscus
Shape One flat side, one curved side Both sides curved, one steeper
Main benefit Excellent performance and affordability Less spherical aberration, so more energy reaches the same focal point
What you get A clean, consistent focal spot for engraving and cutting A cleaner beam, slightly improved edge quality, a little more usable energy at the focus
Where you find it One of the most common CO₂ laser lenses Many premium CO₂ laser lenses
05

Frequently Asked Questions

What is a plano-convex lens?

A lens with one flat side and one curved side. It is one of the most common CO₂ laser lenses and works well for both engraving and cutting.

Which way does a plano-convex lens go in?

The curved side faces the incoming beam and the flat side faces the workpiece.

What is a positive meniscus lens?

A lens with two curved sides, one steeper than the other. The design helps reduce spherical aberration.

What is spherical aberration?

It is when laser energy doesn’t all converge at the same focal point. Reducing it means more of the energy lands at the focus.

Which lens design gives the best performance?

Lek recommends a meniscus lens if you want the best performance from your CO₂ laser. A plano-convex lens remains an excellent, affordable choice.

More From Tech with Lek

Each episode tackles one laser topic. Have a laser topic you’d like explained? Leave it in the comments on the video.