Glass vs RF CO2 Lasers: Cutting Performance Explained

Why Glass Often Wins at Cutting

RF lasers are known as the premium option for high-speed, detailed engraving, and they offer real advantages. But when it comes to cutting thicker materials, a glass CO₂ laser will often get the job done faster and more effectively. In this episode of Tech with Lek, AEON’s Chief Technology Officer explains why.

The short answer: Continuous power, cost, and beam profile. It isn’t the glass that makes the cut better. It’s the amount of usable power the tube can continuously deliver, and glass tubes generally deliver more of it for the money.

01

How a Glass Tube Delivers Power

A glass CO₂ laser is excited by a high-voltage DC power supply. Once it fires, it can deliver a strong, continuous laser beam throughout the cut.

That continuous energy is what cutting materials such as acrylic and wood requires. The laser must keep applying enough energy to heat, vaporize, and remove material as the head moves along the cutting path. The more usable power it can continuously deliver into the cut, the faster you can move or the thicker the material you can cut.

02

How an RF Source Delivers Power

An RF laser uses radio frequency energy to excite the gas inside a compact metal or ceramic enclosure. RF sources respond extremely quickly and can produce short, precisely controlled pulses.

That makes them excellent for high-speed engraving, fine text, photographs, and detailed artwork.

03

Why Cutting Depends on Average Power

Cutting is less dependent on how quickly the laser can turn on and off. It depends more heavily on the average power being delivered into the material.

Glass CO₂ tube strong, continuous beam through the cut RF source short, precisely controlled pulses time
How each source delivers its energy. Illustrative, not measured output.
04

Thicker Acrylic, Wood and Plastics

The difference becomes especially noticeable in thicker acrylic. To cut acrylic cleanly, the laser needs enough energy to melt and vaporize the material through its entire thickness.

With additional continuous power, you can move quicker while still cutting completely through. That can produce a cleaner, more consistent edge. The same principle applies to wood and other plastics.

05

More Continuous Power for the Money

Glass CO₂ lasers generally produce more continuous power for the money, which makes them an excellent choice for faster cutting and thicker materials.

It isn’t the glass that makes the cut better. It’s the amount of usable power the tube can continuously deliver, and the beam profile.

06

Scalpel vs. Steak Knife

Cutting thick material on an RF laser is like cutting with a scalpel. Cutting with a glass tube is like cutting with a steak knife. Both have their specialties.

07

Frequently Asked Questions

Is a glass CO₂ laser better than an RF laser?

Each has its specialty. Glass often cuts thicker materials faster and more effectively. RF is excellent for high-speed engraving, fine text, photographs, and detailed artwork.

Why does a glass tube often cut better?

Continuous power, cost, and beam profile. A glass tube delivers a strong continuous beam, and cutting depends heavily on the average power delivered into the material.

Does the glass itself make the cut better?

No. What matters is the amount of usable power the tube can continuously deliver, and the beam profile.

Can an RF laser cut?

Yes. Lek compares it to cutting thick material with a scalpel: it is a precise tool whose specialty is detail. For thicker materials, a glass tube is usually the faster choice.

Where is the difference most noticeable?

In thicker acrylic, where the laser has to melt and vaporize the material through its entire thickness. The same principle applies to wood and other plastics.

More From Tech with Lek

Each episode tackles one laser topic. Have a technical laser question you want covered? Leave it in the comments on the video.