Knowledge Base

NOVA Legacy

Guides, videos and manuals for your AEON laser.

Unboxing and Setting Up Your NOVA

Video walkthroughs for uncrating a NOVA, setting it up, checking the alignment and running a first engrave.

Take a NOVA 10, 14 or 16 apart into its top and base, move it through tight spaces, then reassemble and rewire it.

Pulse into tape at five points on a NOVA bed to check the beam is centered in the nozzle, and adjust Mirror 3 if it is not.

The maintenance schedule for a NOVA 10, 14 or 16, with steps for the optics, camera, exhaust, bed and chiller.

Fit the 4” lens to a NOVA for thicker materials and deeper items, then calibrate the auto focus with a focal ramp test.

Replace the X or Y drive belt on a MIRA or NOVA, check the tension, then tune the scanning offset settings in LightBurn.

How to set up, align and run the Smart Rotary on a NOVA, and how to return the machine to flat settings afterwards.

Our US-based support team is one phone call away. More ways to reach us are on the Support page.