Aeon Super Nova Laser Cutter & Engraving Machine, view from front right
Aeon Super Nova Laser Cutter & Engraving Machine, front angle view with open lid
Aeon Super Nova Laser Cutter & Engraving Machine, angled view from back right with pass through
Aeon Super Nova Laser Cutter & Engraving Machine, view from back right with panel missing
Aeon Super Nova Laser Cutter & Engraving Machine, angled view from back right
Aeon Super Nova Laser Cutter & Engraving Machine, view from front right
Aeon Super Nova Laser Cutter & Engraving Machine, front angle view with open lid
Aeon Super Nova Laser Cutter & Engraving Machine, angled view from back right with pass through
Aeon Super Nova Laser Cutter & Engraving Machine, view from back right with panel missing
Aeon Super Nova Laser Cutter & Engraving Machine, angled view from back right

Super NOVA CO2 Laser Cutter & Engraving Machine NOVA10S ・ NOVA14S ・ NOVA16S

  • Super Clean Pack Design
  • Metal RF & Glass DC in one machine!
  • Seamless Source Switching (SSS)
  • Scan speeds of up to 2000 mm/second
  • Integrated Auto Focus
  • Built-in 5200 Chiller and Blower
  • Streamlined Ruida Keypad
  • Starting at $17,495

  • Get Instant Pricing. No email required.
Get Pre-order Special!


Meet the Super NOVA, Aeon’s newest addition to our laser family! It’s full of all sorts of new goodies that will make any laser owner fall in love.

The Super NOVA combines the best of both worlds with its innovative dual source design.

Finally, a laser that combines the ultra high resolution and speeds customary of metal RF laser tubes, with the superb cutting performance that only a glass DC laser tube can provide.

Matched with hybrid stepper motors and a newly designed enclosed rail system, the Super NOVA is ready to take your laser engraving and cutting business to the next level.


Increased ROI

It’s quite simple, the less time you spend in front of your laser, the greater your return on investment. With the addition of a fast pulsing, RF metal laser tube, we’ve upgraded to hybrid stepper motors to match. Prepare for takeoff, with maximum scan speeds of up to 2000 mm/sec! It's time to enjoy shorter cycle times, which equals more money in your pocket.

Less Downtime

With increased productivity, an increase in maintenance and repairs is likely to follow. Having all of the major drive components protected from soot and debris, helps keep downtime to a minimum. Aeon’s proactive approach helps you spend less time cleaning and maintaining your equipment, and more time cranking out orders.

Super Clean Pack Design

Aeon’s signature clean pack technology has taken the next step in the evolutionary process. Not only are the linear rails and bearing blocks enclosed (as in previous models), but protective curtains on the left and right side rails now prevent unwanted particles from spreading beyond your work area. Enjoy greater peace of mind with a laser system you can truly rely on.

Fastest in its Class

Aeon’s newly designed, lightweight laser head, paired with high speed, hybrid stepper motors, is sure to leave the competition in the dust. Experience an astonishing blur of acceleration with top speeds reaching up to 2000 mm/sec.

Seamless Source Switching (SSS)

Switching between the RF metal tube and the DC glass tube, happens seamlessly via a motorized first mirror. The software automatically triggers the appropriate laser tube and mirror position in roughly half a second.

All-in-One System

Installing a large format laser in a confined space, has never been more practical. Enjoy a clutter free workspace with a built-in 5200 water chiller, exhaust fan and air pump. All components are still easily accessible and can be removed for routine maintenance.

Integrated Auto Focus

The newly designed laser head features an integrated auto focusing mechanism that is lightweight and a whole lot more reliable. It’s encapsulated right inside the nozzle, to shield it from smoke and debris. Say goodbye to collisions and gouged material.

Advanced Controls

Another industry first is the all new redesigned Ruida controller, which brings commonly used functions right to the surface, for increased setup times and overall ease of use. You can even monitor amperage (mA) and water temperature right from the display screen.


Achieve maximum potential with Lightburn, now included with every Aeon product. Use the camera overlay to quickly position artwork over oddly shaped items, or cut out preprinted materials with accuracy, using the print to cut feature.

Multiple Interfaces

Easily send jobs from your PC or Mac via USB, Ethernet or WiFi. There is even 256 MB of onboard memory built right into the controller for storing popular jobs, or you can even run programs straight from a USB Flash Drive.

Scrap Drawer

Cleanup is a breeze with a newly integrated scrap drawer. All of your cut pieces now fall into a conveniently located compartment below, which can be easily emptied to prevent scrap pieces from piling up and becoming a fire hazard.

Active Airflow

Say goodbye to excessive soot buildup on your material and in your laser cabinet. A series of tiny fans are now used to force feed makeup air into the laser cabinet, which inturn improves how quickly smoke is evacuated from the system. The more air you move across the work table, the cleaner the results, which means less time scrubbing for you.

Model Super Nova 10 Super Nova 14 Super Nova 16
Working Area 27 9/16″ x 39 3/8
700mm x 1000mm
35 7/16″ x 55 1/8
900mm x 1400mm
39 3/8″ x 63
1000mm x 1600mm
Machine Size 47 5/8″ x 59 1/16″ x 40 11/32
1210mm x 1500mm x 1025mm
55 1/2″ x 74 13/16″ x 40 11/32
1410mm x 1900mm x 1025mm
59 7/16″ x 82 11/16″ x 40 11/32
1510mm x 2100mm x 1025mm
Machine Weight 1000 lb (450kg) 1150 lb (520kg) 1370 lb (620kg)
Machine Packing Weight 1200 lb (540kg) 1350 lb (610kg) 1570 lb (710kg)
Crate Packing Size 51 5/8″ x 63 1/16″ x 44 11/32
1310mm x 1600mm x 1125mm
59 1/2″ x 78 13/16″ x 44 11/32
1510mm x 2000mm x 1125mm
63 7/16″ x 86 11/16″ x 44 11/32
1610mm x 2200mm x 1125mm
Laser Tube Reci W2/W4/W6/W8 Premium CO2 Glass Tube, 30W/60W RF Metal Tube
Input Voltage 120V AC Single Phase
Frequency 60 Hz
Engraving Speed 0-2000mm/second
Locating Precision <=0.01mm
Air Assist 105W Built-In Air Pump
Cooling Vapor Compression, built-in 5200 Water Chiller
Blower 330W Built-In Exhaust Fan
Engraving Software Lightburn, RDWorks
Compatible Software CorelDraw, Photoshop, AutoCAD, InkScape, or any software that can export into the supported file formats
Worktable Honeycomb + Blade table
Red Dot Positioning Beam combiner
Built-in WIFI Included
Auto Focus Included
Add-Ons 3-Jaw Chuck Rotary, 4 Wheel Roller Rotary, Fume Extractor
Warranty All Aeon lasers are backed by the factory warranty and our Lifeline for Lifetime care plan, which includes remote startup training and unlimited US based phone support.

Cost and Ordering

Click on the "Get Pricing" button above to get pricing. No email required.
A 50% deposit will secure your spot in line. The remaining balance will not be due until your shipment reaches the Aeon Laser USA facility in Melbourne, Florida.
Yes, Aeon Laser USA (Engraving Machines Plus, Corp) have partnered with ClickLease to offer financing. See our financing options for more.
No, not at this time. The preorder special is an incentive being offered by Aeon Laser USA. You will have to consult with your local Aeon dealer.
Your deposit will be returned to you minus a 10% cancellation fee of the total cost.
Yes, you can arrange a local pickup at the headquarters in Melbourne, FL at no additional charge.

Product Specs

The standard NOVA will come fitted with a glass DC laser tube, stepper motors, and will achieve max speeds of up to 1200mm/sec.

The Super NOVA will come with two laser sources (metal RF and glass DC), hybrid stepper motors, and will achieve max speeds of up to 2000mm/sec.
Metal RF laser tubes can produce greater detail and are able to be pulsed much faster than glass DC laser tubes. Therefore, they are better suited for engraving at high speeds and last 3-5x longer that a glass DC laser tube.

On the other hand, glass DC laser tubes are superior for cutting applications and are far more affordable to replace, especially when you get into the higher wattages.

By combining the two into one machine, you get the best of both worlds!
Yes, you can choose whether to use the metal RF or glass DC tube in the software. Either laser tube can be set to engrave or cut.
The Super NOVA will be available in 3 different sizes:

NOVA10 = 700mm x 1000mm (approx. 28" x 40")
NOVA14 = 900mm x 1400mm (approx. 36" x 55")
NOVA16 = 1000mm x 1600mm (approx. 40" x 63")
The RF metal laser tube for engraving, will be offered in 30W and 60W configurations. The DC glass laser tube for cutting will be offered in the range of 90W-180W.
Either one is available depending on what country you are in. In the United States, all Super NOVAs will come wired for 120 volts, which is the voltage produced by a standard outlet.
Active Airflow is another Aeon innovation used to improve the performance of the exhaust system by force feeding makeup air into the cabinet via a series of tiny fans. The faster air enters and exits the cabinet, the cleaner your results and the less cleaning there is to do.
Seamless source switching is a proprietary technology Aeon developed to switch between the RF metal tube and the DC glass tube. It is all programmed via the software and happens in an instant.
This takes the standard clean pack design from previous generations one step further. Not only are the rails and bearings protected along the X and Y axis, but a new curtain system is used to seal off the rest of the cabinet from the interior work space.
No, the 5200 chiller, exhaust fan and air pump are easily accessible and can be removed in just a few minutes.
The new integrated auto focus uses the actual nozzle from the laser head to sense the material surface versus a separate probe. The new design is less prone to snagging on materials and failing due to a build up of debris.
The new Ruida controller will have direct access to more popular functions that were previously buried in the Z/U menu. It will also display both the mA reading of your laser tube and the water temperature reading of the onboard 5200 chiller.
The Lightburn Camera captures a still Birdseye image of any item you place inside your laser and then allows you to visually overlay your design on top of it. This helps you to quickly and accurately position artwork, which eliminates tedious guess work and reduces failed engraving attempts.
Yes, increasing the air flow by means of compressed air, can assist with cutting applications. The standard air pump is only designed to prevent the focal lens from getting dirty and ensure the laser beam has a clear path to the material, without reflecting off of any smoke. For the Super NOVA, we recommend the 26 gallon Kobalt Quiet Tech from Lowes.
Yes, a full front to rear pass through is standard.
Yes, a standard doorway typically measures anywhere between 30" - 36". The bottom portion of the Super NOVA can be easily removed, leaving the top portion at just under 30" tall, once turned on its side.
Yes, in addition to the Super NOVA, Aeon has also decided to revamp the standard NOVA professional series. Information and pricing will be available shortly after the Super NOVA is released.
Aeon Laser USA Roto rotary

Roto Rotary "Rotoboss"

Handle just about any type of drinkware with our USA made roto rotary. The dual height adjustable sides are perfect for positioning items with extreme tapers, while the spring-loaded third wheel keeps your cups from walking and from flying off the rollers.

100mm Rotary Chuck

Rotary Chuck

The more precise way of handling cylindrical items is with this 3-jaw rotary chuck. Clamp any item up to 3.93” (100mm) in diameter and rotate it for 360 degree engraving.

PiBurn 4.0 with magnetic feet

PiBurn 4.0 with magnetic feet

The PiBurn rotary allows you to engrave cylindrical objects such as cups, tumblers, glasses, bottles, and champagne flutes with ease and precision. PiBurn comes fully assembled with magnetic feet.

Lightburn Camera


Get a bird's eye view of your workspace right on your computer screen for quick and accurate placement of your design, so that you don’t have to measure (Lightburn upgrade required).

Filtrabox Expand X-2 Fume Extractor

Filtrabox Expand X-2 Fume Extractor

Fume Extractor w/ 1-blower and high capacity 3 stage HEPA filtration. Extracts, filters and recirculates clean air into the workspace. Dimensions: 38"(H) x 15"(W) x 31"(D) Recommended for NOVA10S and NOVA14S (light duty only).

Filtrabox Expand X-3 Fume Extractor

Filtrabox Expand X-3 Fume Extractor

Fume Extractor w/ 1-blower and high capacity 3 stage HEPA filtration. Extracts, filters and recirculates clean air into the workspace. Dimensions: 38"(H) x 15"(W) x 31"(D) Recommended for NOVA14S and NOVA16S.

Remote Control

Remote Control

Programming is a breeze with our advanced DSP digital control system or an optional wireless remote that puts all of the controls right in the palm of your hand.

CO2 Laser Protective Goggles - (10.6um) only

CO2 Laser Protective Goggles

Protect your eyes from infrared light radiation that can compromise your vision over time. Glasses are designed for use with CO2 lasers (10.6um) only.

See what Aeon laser owners are making.

Wondering how AEON compares to other lasers?

Test drive the most popular laser brands side-by-side in a relaxed and unbiased setting.

Play with OMTech, Thunder, Boss and Aeon Lasers. Score them using your own criteria. 100% Hands-on!

Save hours of research. Learn how you can participate in 2023 or see some of the results from some of our previous participants.

Sign Me Up!

Need financing?

Get Instant online approval for up to $25,000! All Credit Scores Welcome. No Hard Credit Pull. Easy application.

Need some assistance? 🦉

Tell us a bit about yourself so we can make sure to send you the right information.